GE IS215VCMIH2CC Voltage Control Module
- Product Code: IS215VCMIH2CC
- Availability: In Stock
GE IS215VCMIH2CC - Intermediate Technical Documentation
1. Product Identity & Purpose
- Model Code: IS215VCMIH2CC
- Manufacturer: General Electric (GE) Power & Water
- Product Category: Voltage Control Module (VCM) for GE Mark VIe Distributed Control System (DCS)
- Core Function: Manages, monitors, and regulates voltage signals in critical industrial assets (gas turbines, steam turbines, generators) to ensure stable operation
2. Electrical Specifications
- Analog Inputs: 8 channels (0-10V DC), 16-bit resolution, optically isolated
- Analog Outputs: 4 channels (0-10V DC), 12-bit resolution, short-circuit protected
- Digital I/O: 6 digital inputs (24V DC) / 4 digital outputs (relay, 5A @ 250V AC)
- Power Supply: 24V DC ±10% (draws max 1.2A from Mark VIe system bus)
- Isolation Rating: 2.5kVrms (signal to ground), 1kVrms (power to signal)
3. System Integration & Features
- Communicates via GE Speedtronic® backplane for seamless data exchange with Mark VIe controller
- Configurable via GE ToolboxST software (supports custom voltage control loops, alarm logic)
- Built-in diagnostics: open-circuit detection, over-voltage monitoring, and module health status
- LED status indicators: Power (green), Communication (blue), Fault (red), I/O Activity (amber)
4. Environmental & Mechanical Data
| Parameter | Specification |
|---|---|
| Operating Temperature | 0°C to 60°C (32°F to 140°F) |
| Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
| Humidity | 5% - 95% RH (non-condensing) |
| Mounting | Mark VIe 19-inch rack (1U height, 482.6mm width) |
| Weight | Approx. 0.95kg (2.1 lbs) |
Caution: This intermediate document provides key technical highlights. For complete installation guidelines, wiring diagrams, and compliance certificates (UL 508, CE EN 61010), refer to GE’s official IS215VCMIH2CC Technical Manual (Document No. GEH-6721 Rev. A).