WOODWARD 5464-334 Module

  • 0 reviews
  • Write a review
    • Product Code: 5464-334
    • Availability: In Stock


    WOODWARD 5464-334 Module
    Technical Specification & Operating Guidelines
    1. Product Overview
    The WOODWARD 5464-334 is a high-performance digital control module designed for engine and turbine control applications in industrial and power generation environments. It serves as a key component in Woodward's ProTech® 2000 protection system, providing reliable monitoring and control of critical engine parameters.
    Key features include programmable logic control, high-speed signal processing, and seamless integration with Woodward's control systems. The module complies with industry standards (UL 508, CE) for industrial control equipment and is engineered for long-term reliability in harsh operating conditions.
    2. Technical Specifications
    Processor: 32-bit ARM Cortex-M4, 120 MHz clock speed
    Memory: 512 KB RAM, 4 MB flash memory (non-volatile)
    Power Supply: 24 VDC (18-32 VDC), typical consumption 8 W
    Operating Temperature: -40°C to +85°C
    Input/Output: 8 x analog inputs (4-20 mA), 6 x digital inputs, 4 x relay outputs (5 A/250 VAC)
    Communication Interfaces: 1 x Ethernet (10/100 Mbps), 1 x RS-485 (Modbus RTU), 1 x CAN bus
    MTBF: > 2,000,000 hours (per MIL-HDBK-217F)
    3. Installation Requirements
    The 5464-334 module must be installed in a standard Woodward ProTech® 2000 chassis with proper grounding to prevent electromagnetic interference (EMI) and electrostatic discharge (ESD) damage. Ensure the following during installation:
    • Secure DIN rail mounting (35 mm standard) with locking clips
    • Minimum 30 mm clearance for ventilation around the module
    • Isolation from high-voltage wiring (minimum 150 mm distance)
    • Compliance with Woodward installation manual (document ID: 8200-1602)
    4. Operational Notes
    • The module requires firmware version 4.3 or higher for full functionality and compliance with latest safety standards
    • Calibration should be performed every 12 months or after major system maintenance
    • Configuration and diagnostics can be accessed via Woodward ConfigTool software or web-based interface
    • In case of fault, the module's LED indicators (POWER, STATUS, ALARM) will provide diagnostic information; refer to troubleshooting guide (document ID: 8200-1603) for resolution
    Document Revision: 1.4 | Last Updated: 2026-02-27
    © Woodward, Inc. 2026 - All rights reserved

    Write a review